| TYPE |
Load tap changer analyzer |
| PHYSICAL SPECIFICATIONS |
21”W x 17”H x 9” D (53 cm x 43 cm x 24 cm); Weight: 33 lbs (15.4 kg) |
| OPERATING VOLTAGE |
100 – 240 Vac, 50/60 Hz |
| RESISTANCE READING RANGE |
1 micro-ohm – 500 ohms |
| ACCURACY |
1 – 19,999 micro-ohms: ±0.5% reading, ±1 count;
20 – 999 milli-ohms: ±1% reading, ±1 count;
1 – 500 ohms: ±1.5% reading, ±1 count |
| RESISTANCE CHANNELS |
Three static resistance reading channels, One dynamic resistance channel |
| TEST VOLTAGE |
60 Vdc max |
| TEST CURRENTS |
1 ampere, 5 amperes, 10 amperes |
| AC CURRENT INPUT |
Clamp-on current sensor, 1 – 20 Amperes |
| DISPLAY |
Back-lit LCD Screen (64 x 128 dot graphic ); viewable in bright sunlight and low-light levels |
| PRINTER |
4.5-inch wide thermal printer |
| EXTERNAL DATA STORAGE |
One USB Flash drive interface port; stores up to 999 test records on a USB Flash drive (not included) |
| COMPUTER INTERFACES |
One RS-232C port, One USB port |
| INTERNAL TEST RECORD STORAGE |
Stores up to 128 static resistance test records (48 tests per record) and 11 dynamic resistance test records |
| LOAD TAP CHANGER CONTACT |
240 Vac, 1A |
| SAFETY |
Designed to meet UL 61010A-1 and CAN/CSA C22.2 No. 1010.1-92 standards |
| ENVIRONMENT |
Operating: -10˚C to 50˚ C (15˚F to +122˚ F); Storage: -30˚ C to 70˚ C (-22˚F to +158˚ F) |
| CABLES |
One 50-foot current cable set, Three 50-foot resistance cable sets, One ground cable, One USB cable, One RS-232C cable, One LTC cable, power cord, cable bag |
| OPTIONS |
Transportation Case |
| WARRANTY |
One year on parts and labor |
Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F).
Last updated on February 13, 2009 |
