Login for Software/Firmware Downloads

To prevent automated spam submissions leave this field empty.
       

CB Analyzer Test Box

Circuit Breaker Analyzer Test Box

 
       
9126-UC [CB Analyzer Test Box Unit and Cables]

The Vanguard CB Analyzer Test Box is designed as a field training/demo tool for the CT-7000, CT-8000, and DigiTMR. It can be used to verify the CT-7000/CT-8000/DigiTMR's timing function. The CB Analyzer Test Box provides 3 independent dry-contact channels to simulate the 3 phases of a circuit breaker. A built-in 12Vdc power supply is used to open or close the contacts. An OPEN or CLOSE command can be sent by using the front panel switches or the OPEN and CLOSE terminals. The contact status is indicated by LED's on the front panel. The CB Analyzer Test box can simulate the following CB operations: OPEN, CLOSE, O-C, C-O, O-C-O.

       

CB Analyzer Test Box

Technical Specifications

 
       
PHYSICAL SPECIFICATIONS Dimensions: 14.5”W x 7.5”H x 12”D, (36.8 cm x 19 cm x 30.5 cm)
Weight: 8.2 lbs (3.72 Kg)
INPUT POWER 1 Amp, 90 – 240 Vac, 50/60 Hz
DRY CONTACT OUTPUTS 3 dry-contact channels, 250 Vac/10A
OPEN/CLOSE COIL CONTROL Built-in front panel switch and contact inputs
CONTROL STATUS INDICATORS Built-in LED's
HUMIDITY 90% RH @ 40°C (104°F) non-condensing
SAFETY Designed to meet UL 61010A, CAN/CSA C22.2 No 1010.1-92 standards
ALTITUDE 2,000 m (6,562 ft) to full safety specifications
TEMPERATURE Operating: -10°C to +50°C (+15°F to +122°F)
Storage: -30°C to +70°C (-22°F to +158°F)
WARRANTY One year on parts and labor
Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F).
Last updated on March 13, 2009